Yetter Farm Equipment is wishing you a safe and bountiful Harvest 2024!
Yetter Farm Equipment
Products > Toolbar-Mount Coulters/Toolbars/Rotary Hoes > Rotary Hoes > 3700 Ridge-Till Rotary Hoe

3700 Ridge-Till Rotary Hoe

Call Yetter

Overview

The 3700 Ridge-Till Rotary Hoe can till an area up to 15" wide on top of ridges or strips. The wheels can be set to your desired operating row spacing. As the Ridge-Till Rotary Hoe breaks up soil crust, young plants are able to emerge, eliminating the need for re-planting.

The Ridge-Till Rotary Hoe also knocks out weeds without the use of herbicides, aerates wet residue before planting, and helps prevent blowing sand. It is designed for ridge-till and strip-till operations.

Features

  • Short- and long-cast arms stagger wheels 7" to facilitate residue flow
  • Wheels spaced on approximately 3 1/4" centers for each gang assembly operating on the ridge or strip
  • Five rotary hoe wheels mounted on bar gang till a 15"-wide area on row spacings of 28", 30", 36", 38", or 40"
  • Spoon-bill wheel teeth are mounted on individual, spring-cushioned cast arms, allowing better soil contact with each wheel
  • Very fuel-efficient, with low horsepower requirements; can be operated at speeds of 8-10 mph
  • Available with a wide array of options to fit the needs of your operation (gauge wheels, helper springs, trash guards, min-till conversion kit, and rear parking stand for folding models; see options tab above for details)
  • Rigid available in 12', 15', 21', 28', 30', and 34' widths
  • 180° flat-folding available in 25', 28', 30', 34', 41', and 46' widths
  • Breaks up crusted soil to improve emergence
  • Mechanically rips out young weeds
  • Aerates and fluffs soil around growing plants
  • Incorporates herbicides and small seeds in one fast pass

 

Replacement Rotary Hoe Wheels (3400-111)

  • Available in Black or Green

              

Specs

  • Hitch: Mounted three-point category II/III
  • Hoe wheels: 21" diameter hoe wheels equipped with sealed gothic arch ball bearing
  • Riveted wheel assembly: 16 forged, self-sharpening, spoon-bill teeth
  • Down pressure: 18 lbs. with standard springs
  • Cylinders: 3000 psi with hoses on folding models
  • Safety features: SMV emblem, reflectors, light kit
  • Convenience features: Operator shield and parking stands

3700 Rigid & Folding

Model

Toolbar Dimensions

Gang
Sections

Working
Width

Transport
Width

Row
Configuration

Quantity of
Hoe Wheels

Weight
(lbs.)

3715-101

4" x 4" x 1/4" x 184"

6

13'-10"

15'-0"

6R30, 6R28

30

1,161

3715-102

4" x 4" x 1/4" x 184"

4

11'-4"

15'-0"

4R40, 4R38, 4R36

20

1,041

3721-101

5" x 7" x 1/4" x 255"                   

8

18'-10"

21'-0"

8R30, 8R28

40

1,487

3721-102

5" x 7" x 1/4" x 255"                   

6

18'-0"

21'-0"

6R40, 6R38, 6R36

30

1,367

3725-101

Center: 7" x 7" x 1/4" x 174"

Wings: 7" x 7" x 1/4" x 63"

8

18'-10"

14'-10"

8R30, 8R28

40

2,409

3728-101

Center: 7" x 7" x 1/4" x 167"

Wings: 7" x 7" x 1/4" x 84"

8

24'-8"

14'-9"

8R40, 8R28, 8R36

40

2,502

3730-101

Center: 7" x 7" x 1/4" x 181"

Wings: 7" x 7" x 1/4" x 91"

12

28'-10"

15'-5"

12R30, 12R28

60

3,019

3741-101

Center: 7" x 7" x 1/4" x 245"

Wings: 7" x 7" x 1/4" x 123"

16

38'-10"

20'-9"

16R30, 16R28

80

4,115

3741-102

Center: 7" x 7" x 1/4" x 245"

Wings: 7" x 7" x 1/4" x 123"

12

38'-0"

20'-9"

12R40, 12R38, 12R36

60

3,875

Great job of lifting and redistributing the residue

"I tested a roller harrow and compared the results to that of the Yetter Rotary Hoe. I like the Rotary Hoe better. It does a great job of lifting and redistributing the residue, but it doesn't break off and level the crowns and standing stalks."

Les Seiler • OH

Yetter Rotary Hoes

Heavy rains and temperature changes can cause issues with seed emergence. Yetter Rotary Hoes bust soil crust and aerate soil to help emerging plants. They also control weeds in organic field operations.

Replacement Rotary Hoe Wheels (3400-111)

  • Available in Black or Green

              

 

Toolbar Gauge Wheels (3500-108)

  • Includes 2 gauge wheel assemblies equipped with 15" wheels
  • Fits on 5" x 7" and 7" x 7" toolbars
  • Frame gauge wheels maintain rotary hoe frame at a constant level in respect to the ground contour
  • Recommended tire size: 7.60-15 I-1 Rib

NOTE: Tires are not included with kit

Complete Toolbar Gauge Wheels (3400-108A)

  • Includes 2 gauge wheel assemblies equipped with 15" wheels COMPLETE with 7.60-15 I-1 Rib Implement Tires
  • Fits on 5" x 7" and 7" x 7" toolbars
  • Frame gauge wheels maintain rotary hoe frame at a constant level in respect to the ground contour

Wing Lock Kit (3500-107)

  • Designed to fit 25', 28', 30', 34', 41', and 54' flat-folding Rotary Hoes
  • Prevents wings from floating up in certain operating conditions
  • Allows complete operator control from the tractor seat
  • Locks the wings in horizontal position when desired
  • Will allow the wings to float by simply retracting the wing lift cylinders slightly
  • Weight transfer system from center section to wings to improves penetration

Rear Parking Stand (3500-135)

  • Required when storing rotary hoe in folded position to help stabilize the implement
  • Includes 2 stands per kit
  • Fits 7" x 7" square toolbar

Helper Spring Kit (3400-172)

  • Provides additional down pressure to rotary hoe wheels
  • Increases down pressure from 18 lbs. to 36 lbs.
  • Enables rotary hoe wheels to crack extra-hard crusted soils
  • Installs over existing spring and axle
  • One spring kit fits one wheel

Trash Guard (3400-147)

  • Clears residue and clods
  • Prevents corn root balls from plugging between wheels
  • Prevents wheels from locking or dragging
  • Used on standard rotary hoes only (not required on min-till rotary hoe)
  • One guard fits one wheel

Min-Till Conversion Kit (3400-170)

  • Enables a standard rotary hoe to be converted to min-till version
  • Increases the separation of the two rows of rotary hoes wheels to improve the residue flow
  • Increase the stagger from 7" to 21"

NOTE: When equipping a 3700 Series with Min-Till kit, the helper spring kit (3400-172) must be added to the seven (7) min-till arms above the OSHA screen in the folding position.

* required field
Ready to know more about this Yetter Product?
Complete this form and our sales team will contact you with more specifics.

Hello from YetterCo.com! This website uses cookies.

We use cookies to continuously improve our services and visitor experience. Additionally, we set cookies for visitors on social media sites to track performance. By continuing on this website or clicking "Ok" we will assume that you have read this information and consent to receive cookies on our website. For more information visit our website's Privacy Policy.